Best Ramps BISupply Aluminum Ramp Kit – 8in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit

0

Features

  • BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 8-inch (5.1 by 20.3 cm) boards into sturdy, all-purpose utility trailer ramps; Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps; 2-inch by 8-inch ramp boards required (not included); Kit weighs just under 6 pounds for easy storage, installation, and handling
  • DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability; Loading ramp brackets provide reliable stability and resistance to rust and corrosion; Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5 by 7.25-inch (12.7 by 18.4 cm) faceplate, and pre-screwed bolt holes
  • ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 7.5-inch (10.2 by 19.1 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything; Anti-slip rubber feet help to hold your ramp in place while loading up your toys
  • MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (317 kg) each, while combined these ATV ramps can handle up to 1400 lbs. (635 kg); With this much support, you can quickly and safely load, secure, tow, and organize your motorcycles, motocross bikes, wagons, wheel barrels, and bicycles into a storage shed, truck bed, or trailer
  • EASY TO INSTALL: Using the included hardware, attach the 2 aluminum top plates to one end of your 2×8 lumber board; Slide the anti-slip rubber feet to the other end; Place the top plates on the edge of the tailgate and adjust the distance between the ramps based on your load size; Extra holes in the top plate allows you to drill the ramp into place on your tailgate for a more secure hold

Description

– Top reviewed best Atv ramps

Use the BISupply 8 Inch Aluminum Motorcycle Loading Ramps Trailer Ramp Kit to turn simple 2 by 8-inch boards into sturdy, all-purpose utility ramps. Aluminum ramp brackets and rubber ramp ends hold your ATV loading ramps in place while you load up your toys. Aluminum ramps feature 1.37-inch board insert space to fit standard 2×8 inch boards, non-skid threads on the 5 by 7.25-inch faceplate for traction when loading, and pre-screwed bolt holes for easy installation. Each shed ramp kit has a maximum load capacity of 700 pounds, while combined these mower ramps can handle up to 1400 pounds. Each package includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Use the BISupply 8 Inch Aluminum Motorcycle Loading Ramps Trailer Ramp Kit to turn simple 2 by 8-inch boards into sturdy, all-purpose utility ramps. Aluminum ramp brackets and rubber ramp ends hold your ATV loading ramps in place while you load up your toys. Aluminum ramps feature 1.37-inch board insert space to fit standard 2×8 inch boards, non-skid threads on the 5 by 7.25-inch faceplate for traction when loading, and pre-screwed bolt holes for easy installation. Each shed ramp kit has a maximum load capacity of 700 pounds, while combined these mower ramps can handle up to 1400 pounds. Each package includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


Deal for you!! Hurry up

Buy Best AVT Ramps From Amazon

Nice product, if you take the time to do it right.

My kit did not come with any directions, so I did it my way. I used 8′ long pressure treated 2″× 8″ s. I cut a 10 degree angle on the end of the boards to fit tight up against the aluminum plate. I used a chisel to mortise the aluminum lip into the top of the plank, I also eased the bottom edge of the plank, so it would fit as tight as possible. On the rubber end, I used a chisel to make the end of the plank fit the shape of slot in the rubber. I also used 4 – #14 stainless steel screws to attach the rubber foot to the end of the plank. I used loctite on the supplied nuts and bolts.

Aluminum ramp kit

Brackets did not fit the lumber. Had to use router. Put a couple of drywall screws with washers to hold the rubber feet on. Seems to be working fine after the adjustments.

Nice kit!

These kits have been around for years. I wish I had never given mine to a family member otherwise I’d still have them! Great kit and service from seller!

Well worth it. Easy to use.

I used them on a couple of 2×10’s I had laying around. They work very well for loading my snowblower. The rubber feet are great for non-skid on my concrete garage floor.

Awesome price and good quality

My own wood, their brackets. Worked perfect. I have a tall truck so i used 8 foot wood instead of 6 foot like regular ramps come.

Excellent product

These were easy to assemble and the rubber feet are a plus. Used roofing nails to keep the rubber feet secure to the boards. The pins provided to secure the ramps to trailer are another plus.


View Today’s Deal

Check Few more Product From Trusted Seller


Enable registration in settings - general
Compare items
  • Total (0)
Compare
0